Draw-tite 75892 MAX-FRAME RECEIVER User Manual download pdf

Installation Instructions

Nissan Rogue

(Except Krōm)

Part Numbers:

75892

87657

44708

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 18 & 19mm

Drill Bits: None

1. Remove and return factory tow hook and fasteners to vehicle owner.

2. Raise hitch into position on driver’s side and loosely install center fastener as shown, installing hex bolt and conical washer thru

elongated hole in hitch into vehicle frame. Raise hitch into position on passenger’s side and loosely install center fastener as

shown, installing hex bolt and conical washer thru elongated hole in hitch into vehicle frame. Center hitch on vehicle and install

remaining hardware as shown.

z 2014 Cequent Performance Products – Printed in Mexico

Sheet 1 of 3 75892N 1/14/14 Rev. A

Qty. (5) Hex Bolt M12 x 1.25 x 35mm CL8.8

Qty. (5) Conical Washer ½”

Tighten all M12 x 1.25 CL8.8 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 75892F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Hitch type

Max Gross

Trailer WT (LB)

Max Tongue

WT (LB)

Weight Distribution

Not to be used with Spring bars

Weight Carrying

Ball Mount

3500 (1590 Kg) 350 (159 Kg)

Wiring Access Location: SUV1 & SUV2

Form: F205 Rev A 5-6-05

Fasteners typical for all

mounting locations

Vehicle Frame

Factory Tow Hook

1 2 3

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions Nissan Rogue (Except Krōm) Part Numbers: 75892 87657 447

Page 2 - Instructions d’installation

Instructions d’installation Numéros de pièces : 75892 87657 44708 Attelage montré dans la position appropriée Équipement requis : Clés : 18 et 19 mm

Page 3 - Números de partes:

Instrucciones de instalación Números de partes: 75892 87657 44708 El enganche se muestra en la posición correcta Equipo necesario: Llaves: 18 &

Comments to this Manuals

No comments

Draw-tite 75892 MAX-FRAME RECEIVER User Manual

Browse online or download User Manual for For the car Draw-tite 75892 MAX-FRAME RECEIVER. Draw-Tite 75892 MAX-FRAME RECEIVER User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Draw-tite 75892 MAX-FRAME RECEIVER