Draw-tite 75688 MAX-FRAME RECEIVER User Manual download pdf

Installation Instructions

Land Rover LR2

Part Numbers:

75688

87575

44640

78180

U-Haul

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 5/8” 11/16”, 22mm ,

6” Ratchet Extension, & Ratchet

swivel

Fascia

Weld nuts

Use caution when working near exhaust.

1. Prior to installation thread M14 bolts (Item 1) into both weldnut to clean out dirt & rust.

2. Raise hitch over tail pipe on the driver’s side and start to install rearward bolt to support hitch.

3. Place passenger’s bracket against existing tie down bracket on vehicle and install 7/16” hardware as shown.

4. Install forward M14 bolts (Item 1) into weldnut (push tail pipe forward and rotate bolt to get it into place).

5. Torque all fasteners to specifications.

Rev. A2-22-1075688NSheet 1 of 3

z 2010 Cequent Performance Products

Hex nut 7/16-14Qty. (3)

Hex bolt 7/16-14 X 1.50 GR5Qty. (3)

Flat washer 7/16”Qty. (3)

Conical washer 5/8”Qty. (2)

Lock washer 7/16”Qty. (3)

Hex bolt M14 X 2.00 X 120mm CL8.8Qty. (2)

Tighten all M14 CL8.8 fasteners with torque wrench to 100 Lb.-Ft. (136 N*M)

Tighten all 7/16-14 GR5 fasteners with torque wrench to 50 Lb.-Ft. (68 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 75688F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

400 (182 Kg)4000 (1816 Kg)

Weight Carrying

Ball Mount

400 (182 Kg)4000 (1816 Kg)

Weight Distributing

Max Tongue

WT (LB)

Max Gross

Trailer WT (LB)

Hitch type

Wiring Access Location:

Form: F205 Rev A 5-6-05

Existing tie

down bracket

Tail pipe

Rearward

bolt

Existing tie

down bracket

Passenger's

bracket

Frame rail

1 2 3

Summary of Contents

Page 1 - 44640

Installation InstructionsLand Rover LR2Part Numbers:75688 87575 44640 78180 U-HaulHitch Shown In Proper PositionEquipment Requ

Page 2

Instructions d’installationNuméros de pièces :Attelage montré dans la position appropriéeÉquipement requis :Clés : 5/8” 11/16”, 22mm , R

Page 3

Instrucciones de instalación Números de partes:El enganche se muestra en laposición correctaEquipo necesario:Llaves: 5/8” 11/16”, 22mm , Extensión de

Comments to this Manuals

No comments

Draw-tite 75688 MAX-FRAME RECEIVER User Manual

Browse online or download User Manual for For the car Draw-tite 75688 MAX-FRAME RECEIVER. Draw-Tite 75688 MAX-FRAME RECEIVER User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Draw-tite 75688 MAX-FRAME RECEIVER