Draw-tite 65016 FRONT MOUNT RECEIVER User Manual download pdf

Front Mounted Receiver

Installation Instructions

GMC Savanna

Chevrolet Express

Part Numbers:

65016

NOTE: If front mounted license plate is present, repositioning is necessary.

1. Remove stabilizer bar fasteners and brackets allowing stabilizer bar to swing free.

2. Remove lower fascia and license plate mounting bracket (if existing).

3. Raise receiver, stabilizer bar and stabilizer bar brackets into position and install all fasteners (except drivers side forward fastener) as shown

above.

NOTE: Receiver side brackets go between frame rails and stabilizer bar brackets.

4. Using hitch as a template drill 1/2" hole in drivers side frame rail thru forward attachment hole and install fasteners.

5. If desired, trim and reinstall the lower fascia. CONSULT VEHICLE OWNER BEFORE TRIMMING.

Tighten all M10 CL8.8 fasteners with torque wrench to 38 Lb.-Ft (52 N-m).

z 2005, 2012 Cequent Towing Products

Sheet 1 of 3 N65016 1-9-12 Rev. B

Qty. (4) Hex Bolt, M10 x 1.5 x 35

Qty. (2) Lock Washer, 1/2”

Qty. (4) Lock Washer, 7/16”

Qty. (2) Handle Nut, 1/2”

Qty. (2) Hex Bolt, 1/2”-13 x 1.75

Tighten all 1/2” GR5 fasteners with torque wrench to 75 Lb.-Ft (102 N-m).

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

CARGO CAPACITY – DO NOT EXCEED

500 LB. OR VEHICLE FRONT GROSS

AXLE WEIGHT RATING. (GAWR)

9000

LB. MAX. WINCH LINE PULL

Equipment Required:

Wrenches: 10mm, 15mm, 17mm , 3/4”

Drill Bits: 1/2”

Fastener Kit: K65016

Receiver Shown In Proper Position

Stabilizer Bar Stabilizer Bar

Bracket

Frame

Rail

Bumper

Stabilizer Bar

Bracket

Recovery

Eye

Drilled Hole

Existing Weldnuts

Typical Both Sides

1 2 3

Summary of Contents

Page 1 - Installation Instructions

Front Mounted Receiver Installation Instructions GMC Savanna Chevrolet Express Part Numbers: 65016 NOTE: If front mounted license plate is present, r

Page 2 - Instructions d’installation

Récepteur à montage sur l’avant Instructions d’installation GMC Savanna Chevrolet Express Numéro de pièce : 65016 REMARQUE : Si nécessaire, repositio

Page 3 - Instrucciones de instalación

CAPACIDAD DE CARGA – NO SUPERE 500 LB. O LA CALIFICACIÓN DE PESO BRUTO DEL EJE DELANTERO DEL VEHÍCULO Receptor frontal Instrucciones de instalación

Comments to this Manuals

No comments

Draw-tite 65016 FRONT MOUNT RECEIVER User Manual

Browse online or download User Manual for For the car Draw-tite 65016 FRONT MOUNT RECEIVER. Draw-Tite 65016 FRONT MOUNT RECEIVER User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Draw-tite 65016 FRONT MOUNT RECEIVER