Draw-tite 75549 MAX-FRAME RECEIVER User Manual download pdf

Installation Instructions

Dodge Sprinter (Van and Cab & Chassis)

Freightliner Sprinter (Van and Cab & Chassis)

Part Numbers:

87441, 75239 UH

75549, 44576

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 18mm, 19mm

Drill Bits: None

Sprinter Van Models:

1. Remove tie down hook from passenger’s side frame rail and return tie down hook and fasteners to vehicle owner.

2. Raise hitch into position and install fasteners as shown, installing hex bolt and lock washer through round hole in hitch bracket

and hex bolts and toothed washers through oblong slots in hitch bracket, each side.

Sprinter Cab & Chassis Models:

1. If present, remove wheel chock bracket from driver’s side frame rail and retain bracket for reinstallation. Discard bolts.

2. Raise hitch and wheel chock bracket into position and install fasteners as shown, installing hex bolt and lock washer through

round hole in hitch bracket and hex bolts and toothed washers through oblong slots in hitch bracket, each side.

z2011, 2012 Cequent Performance Products

Sheet 1 of 3 75549N 02/24/12 Rev. F

Qty. (8) Hex Bolt M12 x 1.75 x 120mm CL8.8

Qty. (8) Spacer ¼ x 1 x 2

Qty. (6) Toothed Washer ½”

Qty. (8) Hex Nut M12 x 1.75

Qty. (2) Lock Washer ½”

Tighten all M12 x 1.75 CL8.8 fasteners with torque wrench to 68 Lb.-Ft. (92 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 75549F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Hitch type

Max Gross

Trailer WT (LB)

Max Tongue

WT (LB)

Weight Distributing

7500 (3405 Kg) 750 (341 Kg)

Weight Carrying

Ball Mount

6000 (2724 Kg) 600 (272 Kg)

Wiring Access Location: SUV1, SUV2

Form: F205 Rev A 5-6-05

Vehicle Frame

Vehicle Fascia

Fasteners typical both

Sides of vehicle

Vehicle Frame

jkmn

jlmn

(144” and 170” Wheelbase)

NOTE:

Unconfirmed reports of vehicles with

30-3/8” frame widths, (measured

outside to outside of frame).

This hitch will not fit a vehicle with a

30-3/8” wide frame measured outside

of frame to outside of frame.

Mercedes Sprinter (Van and Cab & Chassis)

1 2 3

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions Dodge Sprinter (Van and Cab & Chassis) Freightliner Sprinter (Van and Cab & Chassis) Part Numbers: 87441, 75239 UH 7

Page 2 - Instructions d’installation

Instructions d’installation Dodge Sprinter (fourgon et châssis-cabine) Freightliner Sprinter (fourgon et châssis-cabine) Numéros de pièces : 87441, 75

Page 3 - Números de partes:

Instrucciones de instalación Dodge Sprinter (Van, y cabina y chasis) Freightliner Sprinter (Van, y cabina y chasis) Números de partes: 87441, 75239 U

Comments to this Manuals

No comments

Draw-tite 75549 MAX-FRAME RECEIVER User Manual

Browse online or download User Manual for For the car Draw-tite 75549 MAX-FRAME RECEIVER. Draw-Tite 75549 MAX-FRAME RECEIVER User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Draw-tite 75549 MAX-FRAME RECEIVER