Draw-tite 38374 ROOF RACK ACCESSORY User Manual download pdf

KEY CODE

Key

Lock Barrel

GTX Cover

ROLA End Caps

APX Cover

Retract Key 2-3mm

Depress Metal Wafer and

push Key back into Lock Barrel.

Locked

Unlocked

Parts List: (Refer to Fig.1a)

STEP 1: Installing the Lock Barrel

STEP 2: Locking the Mechanism

Key Code: _ _ _

Qty Item

4 Lock Barrel

4 Key

1 Fitting Instructions

Pull the Key back out of the Lock Barrel approximately 2-3mm. With the key

in this position, depress the last large Metal Wafer before fully re-inserting

the key. You may now release your finger from the metal wafer. (Fig 2b.)

Using your thumb and forefinger, insert the Key and Lock Barrel assembly

into the Lock Cavity until the Lock barrel is fully inserted. (Fig 3a.)

Place your finger against the face of the Lock Barrel (to prevent it from being

pulled out of the Lock Cavity), then remove the key with your other hand.

If the key cannot be pulled out, then rotate the Lock slightly (with Key) and

pull on the key GENTLY until the Key can be removed. (Fig. 3b)

To lock, turn Lock Barrel 90° clockwise, so that the Key Slot is vertical.

To unlock, turn Lock Barrel 90° anti-clockwise to the horizontal position.

(Fig 4a).

Leave unlocked for assembly.

Repeat this process for the remaining

Lock Barrels.

Fig. 1a

Remove Clear Plastic

Tubing from Lock Barrel

Fig. 2a

Fig. 3a

Fig. 3b

Fig. 4a

Fig. 2b

If the Key is not already in the Lock Barrel, fully insert it into the Lock Barrel

and remove the clear plastic tubing covering the Lock Barrel. (Fig 2a)

Ensure that all the Metal Wafers are now contained within the cylinder of

the Lock Barrel. If they are not in this position, repeat STEP A.

Record Key code numbers so

replacement keys can be supplied

in case they are misplaced.

Lock Barrel Kit

Rev A

3/19/10

Sheet 1 of 1

38374N

RBX

Lockable

Cover

NOTE: Failure to follow these instructions

will void warranty.

To order replacement locks and keys or keys only please visit:

www.rolaproducts.com

Or call our Customer Service desk at 1-800-632-3290

Range of ROLA covers and end caps this product applies to:

Prin

ted

hin

Lock Barrel Kit 1

Summary of Contents

Page 1 - Lock Barrel Kit

KEY CODEKeyLock BarrelGTX CoverROLA End CapsAPX CoverRetract Key 2-3mmDepress Metal Wafer and push Key back into Lock Barrel.LockedUnlockedParts List:

Comments to this Manuals

No comments

Draw-tite 38374 ROOF RACK ACCESSORY User Manual

Browse online or download User Manual for For the car Draw-tite 38374 ROOF RACK ACCESSORY. Draw-Tite 38374 ROOF RACK ACCESSORY User Manual [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Draw-tite 38374 ROOF RACK ACCESSORY