Draw-tite 36311 FRAME HITCH User Manual download pdf

Installation Instructions

SUBARU FORESTER

Part Numbers:

36311

06975

90757

Hitch Shown In Proper Position

Wiring Access Location: SUV4

Equipment Required:

Wrenches: 12mm, 14mm, 17mm

Drill Bits: None

1. Lower carbon canister and bracket from passenger side of frame.

2. Remove the tie-down bracket from vehicle frame.

3. Remove center fascia mounting bracket if present.

4. Remove exhaust mounting bracket from vehicle frame. (Return tie-down brackets, exhaust mounting bracket, center fascia

bracket & fasteners to vehicle owner for reinstallation if hitch is removed).

5. Bolt hitch to vehicle. Sandwiching carbon canister bracket between hitch and frame. Using fasteners provided as shown

above.

6. Bolt rubber exhaust hanger to hitch side bracket using fasteners provided as shown above.

7. Reattach carbon canister to carbon canister bracket.

8. Reattach center fascia tab if present to hitch with existing fastener or cable tie provided.

Rev. A8-10-05N36311Sheet 1 of 3

z 2002, 2005 Cequent Towing Products

7/16 Flat Washer Qty. (2)

Cable TieQty. (1)

M10 X 1.50 Hex Bolt Qty. (1)

M10 X 1.25 Hex Nut Qty. (1)

1/2 Conical Washer Qty. (7)

7/16 Lock Washer Qty. (1)

M12 X 1.25 X 40mm Hex Bolt Qty. (7)

Tighten all M12 CL10.9 fasteners with torque wrench to 92 Lb.-Ft.

Tighten all M10 fasteners with torque wrench to 20-30 Lb.-Ft.

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

3500 LB Max Gross Trailer Weight

300 LB Max Tongue Weight

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Drawbar must be used in the

RISE

position only.

Drawbar Kit:

36051 OR 90001

Fastener Kit: F36311 OR 90757F

Carbon Canister

Plastic Bumper Fascia

Attach Center Fascia Tab Here

Using Cable Tie Provided

Tie-down

Bracket

Existing Weld nut

Carbon Canister Bracket

Frame

Tie-down Bracket

Exhaust Mounting Bracket

1 2 3

Summary of Contents

Page 1 - Installation Instructions

Installation InstructionsSUBARU FORESTERPart Numbers:363110697590757Hitch Shown In Proper PositionWiring Access Location: SUV4Equipment Required:Wrenc

Page 2 - Instructions d’installation

Instructions d’installationSUBARU FORESTERNuméros de pièces:363110697590757Attelage montré dans la position appropriéePoint d’accès au câblage: SUV4Éq

Page 3 - Instrucciones de instalación

Instrucciones de instalaciónSUBARU FORESTERNúmeros de partes:363110697590757El enganche se muestra en la posición correctaUbicación de acceso a los ca

Comments to this Manuals

No comments

Draw-tite 36311 FRAME HITCH User Manual

Browse online or download User Manual for For the car Draw-tite 36311 FRAME HITCH. Draw-Tite 36311 FRAME HITCH User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Draw-tite 36311 FRAME HITCH