Draw-tite 36226 FRAME HITCH User Manual

Browse online or download User Manual for For the car Draw-tite 36226 FRAME HITCH. Draw-Tite 36226 FRAME HITCH User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Installation Instructions
ACURA 3.5 RL
Part Numbers:
36226
Hitch Shown In Proper Position
Wiring Access Location: PC3
Equipment Required: fish wire (provided)
Wrenches: 14mm, 17mm, 7/8”
Drill Bits: 1/2”
1. Remove tow hook from drivers side of vehicle frame rail and return to vehicle owner.
2. Lower vehicle exhaust.
3. Center hitch on vehicle frame and install the M10 fasteners (item 1&2) as shown above.
4. Using the hitch as a template, drill three (3) 1/2” holes in frame rails as shown above.
5. Install the remaining fasteners as shown above.
6. Re-attach the exhaust.
Tighten all M10 fasteners with torque wrench to 38 Lb.-Ft. (52 n*m)
Rev. A11-10-08N36226Sheet 1 of 1
z 2008 Cequent Towing Products
Nut 1/2” -13 Qty. (3)
6
Bolt – carriage 1/2”-13 x 1-3/4”Qty. (3)
3
Washer - lockQty. (3)
5
Washer – 3/8” conical toothedQty. (1)
2
Block 1/4 x 1 x 3Qty. (3)
4
Bolt – hex head M10 x 1.25 x 30mmQty. (1)
1
Tighten all 1/2” fasteners with torque wrench to 75 Lb.-Ft. (102 n*m)
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
3500 LB Max Gross Trailer Weight
300 LB Max Tongue Weight
Do Not Exceed Lower of Towing Vehicle
Manufacturer’s Rating or
Drawbar must be used in the
RISE
position only.
Drawbar Kit:
36061
Fastener Kit: 01130-978
Form F206 Rev A 5605
1
2
3
4
5
6
Page view 0
1

Summary of Contents

Page 1 - Installation Instructions

Installation InstructionsACURA 3.5 RLPart Numbers:36226Hitch Shown In Proper PositionWiring Access Location: PC3Equipment Required: fish wire (provide

Comments to this Manuals

No comments