Draw-tite 24748 SPORTFRAME HITCH User Manual download pdf

Installation Instructions

VW Jetta Sedan

Except Turbo and all Wagons

Part Numbers:

77106

24748

24783

Hitch Shown In Proper Position

Wiring Access Location: PC3, PC4

Equipment Required:

Wrenches: 3/4”, 7/8”

Drill Bits: 1/2”

1-1/4”

1. Note: Remove spare tire before drilling!

2. Raise hitch into position and install the 1/2-13 hex bolt at tow hook location. Using the hitch as a template drill the three (3) 1/2“

holes used for the attachment of the hitch as Shown above. Install three (3) 1/2-13 carriage bolts.

3. After placing the long spacer (2 sq. Holes) in the approximate position shown inside the trunk pan use it as a template to drill the

remaining 1/2" hole. Install remaining fasteners.

4. Tighten all fasteners to the required torque specification.

5. Seal holes drilled in trunk pan to prevent intrusion of exhaust fumes and water.

6. Reinstall spare tire in trunk.

Rev. B6-23-0624748NSheet 1 of 3

z 2005, 2006 Cequent Towing Products

Bar (Long Block)Qty. (1)

Lock WasherQty. (5)

Spacer (sq. Holes)Qty. (2)

SpacerQty. (1)

Carriage Bolt 1/2-13 X 1.75Qty. (4)

Flat WasherQty. (2)

Nut 1/2-13Qty. (5)

Bolt 1/2-13 X 1.75Qty. (1)

Tighten all 1/2” GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Drawbar must be used in the

RISE

position only.

Drawbar Kit:

3593

Fastener Kit: 24748F

2000 LB (908Kg) Max Gross Trailer Weight

200 LB (90.8 Kg) Max Tongue Weight

Remove spare tire before drilling!

Seal holes drilled

in trunk pan to

prevent intrusion

of exhaust

fumes

and water.

Frame rail

Tow hook

Existing hole

Trunk pan

Fascia

Long block

Drilled holes

Form F206 Rev A 5605

1 2 3

Summary of Contents

Page 1 - Installation Instructions

Installation InstructionsVW Jetta Sedan Except Turbo and all WagonsPart Numbers:771062474824783Hitch Shown In Proper PositionWiring Access Location: P

Page 2 - Instructions d’installation

Instructions d’installationVW Jetta Sedan Sauf les modèles Turbo et toutes les familialesNuméros de pièces :771062474824783Attelage montré dans la pos

Page 3 - Instrucciones de instalación

El enganche se muestra en la posición correctaUbicación del acceso al cableado: PC3, PC4Equipo necesario:Llaves: 3/4”, 7/8”Brocas de taladro: 1/2”2451

Comments to this Manuals

No comments

Draw-tite 24748 SPORTFRAME HITCH User Manual

Browse online or download User Manual for For the car Draw-tite 24748 SPORTFRAME HITCH. Draw-Tite 24748 SPORTFRAME HITCH User Manual [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Draw-tite 24748 SPORTFRAME HITCH